Part Finder

Looking for a specific item in our catalog? Use the search bar below to quickly lookup products by identification markings, part number, drawing number, equipment type or keywords.

ImagePart #Part NameDescriptionDrawing #Part Type
E900-010E/Fusing 900 Moldable Silicone Putty Gray

Fill voids to prevent animal or liquid incursion. Use on potheads, conduits, pipes, seams, gaps and more. Can also be used to replace custom gaskets and build channels to divert liquid away from dangerous areas. Works on masonry, PVC, ABS, metal, wood, ceramic, glass, and more.

*Putty is malleable and may slightly shift or change thickness over time, putty requires careful application for high voltage uses. If necessary, pack more putty to increase its dielectric strength.
**May stain some surfaces.

E/BSC-XXLE/Bus Support XXL

Fits round, flat or angle bus ranging from 4.00in (10.16 cm) to 6.00in (15.24 cm).

113-00-01
E-INS-Glider-750E/Insulation Hand Glider Tool

Install E/Insulation on conductors, cables and jumpers with greater ease compared to applying by hand. Works on E/Insulation up to 0.75in.

,
E/INS-EXT-450-G/5E/Insulation Round Bus Unreinforced 4.50in

Split line silicone hose for insulating bus against phase-to-ground or phase-to-phase wildlife contact.

176-00-450-G
E/INS-EXT-350-G/5E/Insulation Round Bus Unreinforced 3.50in

Split line silicone hose for insulating bus against phase-to-ground or phase-to-phase wildlife contact.

176-00-350-G
E/INS-EXT-250-G/5E/Insulation Round Bus Unreinforced 2.50in

Split line silicone hose for insulating bus against phase-to-ground or phase-to-phase wildlife contact.

176-00-250-G
E/DISCONNECT CVR-KITE/Disconnect Kit

Install on hat channel or U-channel ground with one or more insulators to prevent phase-to-ground wildlife contact with disconnect switches.

116-00-00
E/SS-30Silicone Sheet 30in x 10ft Roll

Rolls of silicone sheet material that can be cut to form around any complex objects to insulate against phase-to-phase and phase-to-ground wildlife contact. Use in conjunction with lineman scissors, E/Hole Punch and E/Push Pins to create a custom cover for any energized equipment.

330-00-02
E/SS-24Silicone Sheet 24in x 10ft Roll

Rolls of silicone sheet material that can be cut to form around any complex objects to insulate against phase-to-phase and phase-to-ground wildlife contact. Use in conjunction with lineman scissors, E/Hole Punch and E/Push Pins to create a custom cover for any energized equipment.

330-00-01
E/INS-FLAT400G-5E/Insulation Flat Bus 4.00in

Insulates flat bus up to 4in (101.6mm) width. Sold in 5ft (1.5m) pieces.

256-00-400
E/INS-175-OE/Insulation 1.75in Orange

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

176-00-175-O
E/INS-150-OE/Insulation 1.50in Orange

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

176-00-150-O
E/INS-125-OE/Insulation 1.25in Orange

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

176-00-125-O
E/INS-100-OE/Insulation 1.00in Orange

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

176-00-100-O
E/INS-075-OE/Insulation 0.75in Orange

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

176-00-075-O
E/INS-050-OE/Insulation 0.50in Orange

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

176-00-050-O
E/INS-025-OE/Insulation 0.25in Orange

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

176-00-025-O
E/SECTOS SWITCH COVERE/ Sectos Switch Cover

Switch cover designed for Schneider or ABB switch assemblies on distribution circuits.

354-00-01
E/INS-THIN WALL-125-GE/Insulation Thin Wall 1.25in

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase contact. Great for protection from brush contact.

345-00-125
E/INS-THIN WALL-100-GE/Insulation Thin Wall 1.00in

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase contact. Great for protection from brush contact.

345-00-100
E/INS-THIN WALL-075-GE/Insulation Thin Wall 0.75in

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase contact. Great for protection from brush contact.

345-00-075
E/CAP CVR LGEE/ Capacitor Cover Large

Fits both one and two bushing capacitors.

211-00-00
E/INS-THIN WALL-050-GE/Insulation Thin Wall 0.50in

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase contact. Great for protection from brush contact.

345-00-050
E/T-Bus CoverE/Insulation T-Bus Universal

T-shaped silicone extrusion for insulating T-beam bus bar against phase-to-ground or phase-to-phase wildlife contact.

196-30-01
E/INS-FLAT325G-5E/Insulation Flat Bus 3.25in

Insulates flat bus up to 3.25in (82.55mm) width. Sold in 5ft (1.5m) pieces.

256-00-325
E/INS-ABC-325" TAIL-G-60E/Insulation Angle Bus 3.25in

Angled extruded silicone for insulating angle bus bar up to 3.25in against phase-to-ground or phase-to-phase wildlife contact.

232-60-325
E/INS-ABC-400-TAIL-R-36E/Insulation Angle Bus 4.00in

Angled extruded silicone for insulating angle bus bar up to 4.00in against phase-to-ground or phase-to-phase wildlife contact.

232-36-400
E/INS-650-GE/Insulation Round Bus Reinforced 6.50in

Split line silicone hose for insulating bus against phase-to-ground or phase-to-phase wildlife contact.

176-00-650-G
E/INS-450-GE/Insulation Round Bus Reinforced 4.50in

Split line silicone hose for insulating bus against phase-to-ground or phase-to-phase wildlife contact.

176-00-450-G
E/INS-350-GE/Insulation Round Bus Reinforced 3.50in

Split line silicone hose for insulating bus against phase-to-ground or phase-to-phase wildlife contact.

176-00-350-G
E/INS-250-GE/Insulation Round Bus Reinforced 2.50in

Split line silicone hose for insulating bus against phase-to-ground or phase-to-phase wildlife contact.

176-00-250-G
E/INS-200-GE/Insulation 2.00in

Split line silicone hose for insulating bus against phase-to-ground or phase-to-phase wildlife contact.

176-00-200-G
E/INS-175-GE/Insulation 1.75in

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

176-00-175-G
E/INS-150-GE/Insulation 1.50in

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

176-00-150-G
E/INS-125-GE/Insulation 1.25in

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

176-00-125-G
E/INS-100-GE/Insulation 1.00in

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

176-00-100-G
E/INS-075-GE/Insulation 0.75in

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

176-00-075-G
E/INS-050-GE/Insulation 0.50in

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

176-00-050-G
E/INS-025-GE/Insulation 0.25in Gray

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

176-00-025-G
E/FTP-480-35kV RedE/Fusing Tape 4.00in High Insulation Red

Self-fusing silicone wrap used to insulate complex utility equipment up to 50kV including terminations, connections, cables and more.

E/FTP-480-35kV GrayE/Fusing Tape 4.00in High Insulation Gray

Self-fusing silicone wrap used to insulate complex utility equipment up to 50kV including terminations, connections, cables and more.

E/FTP-25080-35kV REDE/Fusing Tape 2.50in High Insulation Red

Self-fusing silicone wrap used to insulate complex utility equipment up to 50kV including terminations, connections, cables and more.

E/FTP-25080-35kV GRAYE/Fusing Tape 2.50in High Insulation Gray

Self-fusing silicone wrap used to insulate complex utility equipment up to 50kV including terminations, connections, cables and more.

E/FTP-400RE/Fusing Tape 4.00in Red

Self-fusing silicone wrap used to insulate complex utility equipment including terminations, connections, cables and more.

E/FTP-400GE/Fusing Tape 4.00in Gray

Self-fusing silicone wrap used to insulate complex utility equipment including terminations, connections, cables and more.

E/FTP-250RE/Fusing Tape 2.50in Red

Self-fusing silicone wrap used to insulate complex utility equipment including terminations, connections, cables and more.

E/FTP-250GE/Fusing Tape 2.50in Gray

Self-fusing silicone wrap used to insulate complex utility equipment including terminations, connections, cables and more.

E/FTP-100RE/Fusing Tape 1.00in Red

Self-fusing silicone wrap used to insulate complex utility equipment including terminations, connections, cables and more.

E/FTP-112GE/ Fusing Tape 112

Self-fusing silicone wrap used to insulate complex utility equipment including terminations, connections, cables and more.

E/CAP-EMC-BOOT-GE/ Capacitor Boot

Fits capacitors up 3.4in wide.

111-00-01
E/BC-ME/ Bushing Cover Medium

Insulate a bushing with a height up to 10.86in (275.84mm) and a width of 6.7in (170.18mm).

346-00-02
E/BC-X-LGEE/ Bushing Cover Extra Large

Insulate a bushing with a height up to 11.8in (299.72mm) and a width of 6.7in (170.18mm).

346-00-01
E/GSC-X-LONGE/ Ground Stud Cover Extra Long

Protects ground stud connectors from animal contact.

163-00-02
E/GSC-LONGE/ Ground Stud Cover Long

Protects ground stud connectors from animal contact.

163-00-01
E/GSC-SHORTE/ Ground Stud Cover Short

Protects ground stud connectors from animal contact.

204-00-01
E/ACH-L-185Animal Control Strips

Prevents animals from climbing over substation fences and birds from roosting on cross arms.

254-10-01
E/Hole PunchE/ Hole Punch

Spring-loaded hole punch for modifying E/Covers and E/Silicone Sheets to eliminate gaps.

301-00-00
E/Silicone Tie Wrap-27-GE/ Silicone Tie Wraps 27in

Long lasting alternative to temporary plastic tie wraps or zip ties. Each bag contains 10 ties.

161-00-03
E/Silicone Tie Wrap-13-GE/ Silicone Tie Wraps 13in

Long lasting alternative to temporary plastic tie wraps or zip ties. Each bag contains 10 ties.

161-00-01
E/Silicone Tie Wrap-9-GE/ Silicone Tie Wraps 9in

Long lasting alternative to temporary plastic tie wraps or zip ties. Each bag contains 10 ties.

161-00-02
E/Push Pins Single Wall, RedPush Pins Red

Pins used to secure Midsun molded covers and silicone sheets. Included with covers. Sold separately in bags of 50.

147-00-01R
E/HSA-Anti NestE/ Anti-Nesting Hot Stick Attachment

Hot stick attachment for Anti-Nesting barriers enabling energized installation.

322-00-01,
E/Anti-Nest-Bar 20-45E/ Anti-Nesting Barrier 20in

Angled barrier that blocks wildlife from utility equipment while preventing animals from roosting in the area.

299-20-24
E/Anti-Nest-Bar 16-34E/ Anti-Nesting Barrier 16in

Angled barrier that blocks wildlife from utility equipment while preventing animals from roosting in the area.

299-00-01
E/Getaway GuardE/ Getaway Guard

Barrier assembly that includes a large disc and 10 slippery rotating collars that prevents climbing animals access via overhead power lines in open air substations.

101-00-00
E/BB-2350E/ Bird Barrier 24in No SlotsEBPC-2350-525-187
E/BAR SETS-12"-NO SLOTSE/ Bird Barrier 12in No SlotsEBPC-1200-350-125-3A
E/BAR SETS-20"-SLOTSE/ Bird Barrier 20in SlotsEBSC-2000-450-125-3A
E/BAR SETS-20"-NO SLOTSE/ Bird Barrier 20in No SlotsEBPC-2000-450-125-3A
E/INSERT-FLEX-20/24-GE/Flex-Barrier Insert Clip 20-24in

Insert for 20in and 24in E/Flex Barriers that enables fitting to smaller core insulators.

138-20-24,
E/INSERT-FLEX-16-GE/Flex-Barrier Insert Clip 16in

Insert for 16in E/Flex Barriers that enables fitting to smaller core insulators.

138-16-16,
E/Flex Bar-R-24"E/ Flex Barrier 24in Red

One piece disc-shaped barrier that blocks wildlife from contact with power equipment.

138-24-01R
E/Flex Bar-R-20"E/ Flex Barrier 20in Red

One piece disc-shaped barrier that blocks wildlife from contact with power equipment.

138-20-01R
E/Flex Bar-R-16"E/ Flex Barrier 16in Red

One piece disc-shaped barrier that blocks wildlife from contact with power equipment.

138-16-01R
E/Flex Bar-G-24"E/ Flex Barrier 24in Gray

One piece disc-shaped barrier that blocks wildlife from contact with power equipment.

138-24-01G
E/Flex Bar-G-20"E/ Flex Barrier 20in Gray

One piece disc-shaped barrier that blocks wildlife from contact with power equipment.

138-20-01G
E/Flex Bar-G-16E/ Flex Barrier 16in Gray

One piece disc-shaped barrier that blocks wildlife from contact with power equipment.

138-16-01G
E/FTP-100GE/Fusing Tape 1.00in Gray

Self-fusing silicone wrap used to insulate complex utility equipment including terminations, connections, cables and more.

E/Push Pins Single Wall, GrayPush Pins Gray

Pins used to secure Midsun molded covers and silicone sheets. Included with covers. Sold separately in bags of 50.

147-00-01G
E/PT-T-LA RECLR CVRPole Top Transformer Lightning Arrestor Recloser Cover

Designed to fit either pole top bushings or lightning arrestors with a pass-through lead.

262-00-03
E/Term-CVTermination Cover

Silicone cover designed to cover underground termination bushings.

164-20-01
E/SRG-ARR-CVRSurge Arrestor Cover

Designed to fit taller lightning arrestors with a pass-through lead or pole top bushings.

268-00-02
E/STCSubstation Termination Cover

Silicone cover designed to protect various sizes of termination substrates. Allows for a quick on/off application.

284-00-01
E/BC-RARight Angle Bushing Cover

Silicone cover designed to fit large bushings with double right angle lead connections.

104-00-02
E/SRVSCRecloser Voltage Sensor Cover

T-shaped for use on recloser T-Sensors.

103-00-01
E/PT-LA-CAPE/ Pole Top Lightning Arrestor Cap

Designed for pole top right angle lightning arrestor.

184-00-01
E/PT-LA RECLSR-CVRPole Top Lightning Arrestor Recloser Cover

Designed for pole top arrestors with a single lead at a right angle. It may also be used for pole top right angle bushings.

262-00-02
E/PIN INS CV-MEDPin Insulator Cover Medium

Fits standard cross-arm pin insulators.

126-00-03
E/PIN INS CV-LGPin Insulator Cover Large

Fits large cross-arm pin insulators.

126-00-01
E/PIN INS CV-SMPin Insulator Cover Small

Fits standard cross-arm pin insulators.

126-00-02
E/LACLightning Arrestor Cover

Fits multiple substation lightning arrestors. Adapts to different bus and lead connections. Easy on/off application.

137-10-01
E/BC – LG – X – WLarge Bushing Width Extension

Adds 6.80in (172.72mm) to the width of the E/Bushing Cover Large.

199-00-01
E/BC-LG-X-WRA/CR5Large Bushing Cover Right Angle Port Cone

Cone that attaches to E/Bushing Cover Large Right Angle Extension.

197-00-01
E/BC-LG-X-WTLarge Bushing Cover Width Top Extension

Adds 5in (127mm) to the top width of the E/Bushing Cover Large.

202-00-01
E/BC-LG-X-H/FLarge Bushing Cover Height Filler Extension

Adds height to E/Bushing Cover Large Height Extension.

203-00-01
E/BC-LG-X-HBushing Cover Height Extension

This extension gives an additional 6.10in (154.94mm) to the height of E/Bushing Cover Large.

201-00-01
E/BC-LG-X-WRA-CAPBushing Cover Right Angle Extension

Adds an additional 6.8in (172.72mm) to the width of the E/Bushing Cover Large and also features a right angle exit point.

205-00-01
E/FUSE CUT OUT-LG ASSYFuse Cutout Cover Large

For use on larger fuse cut-out switches. The design allows for easy opening and closing of the fuse.

260-10-01
E/FUSE CUT OUT CVRFuse Cutout Cover

For use on fuse cut-out switches. The design allows for easy opening and closing of the fuse.

132-00-01
E/L-SENSOR CVL - Sensor Cover

Fits right-angle recloser sensors.

247-00-01
E/FPS-CVRFPS Current Sensor Cover

Insulates the bottom sensor of a *Fisher Pierce current sensor.

222-00-01
E/PIN INS CV-TALLE/ Pin Insulator Cover Tall

Fits large cross-arm pin insulators.

126-00-04
E/BC-DBL-LEADE/ Double Lead Cover

Accommodates bushings with multiple lead connections.

155-50-01
E/PT-DL-LA RECLSR CVRDouble Lead Lightning Arrestor Recloser Cover

Designed for pole top arrestors with double leads at a right angle.
It may also be used for pole top right angle bushings.

262-00-01
E/CCS-CVRCapacitor Current Sensor Cover

Insulates the bottom sensor of a Fisher Pierce current sensor.

266-00-02
E/PT-CAPACITOR-CVCapacitor Cover

Designed to protect energized portion of capacitor bushings.

227-00-01
E/BC-SmallBushing Cover Small

Fits small station service transformer bushings, PT’s and CT’s, and pole-top transformer bushings with a height of 6.40in (162.56mm) and with a bottom opening of 3in (76.20mm).

210-00-01
E/BC-SIDEBushing Cover Side

Designed for recloser bushings. The perforated bottom allows it to fit various sized bushings up to 11.50in (292.1mm) high with an opening of 5.90in (149.86mm) wide.

180-00-02
E/BC-LG-X-WRA-CAP ONLYBushing Cover Right Angle Extension Cap

Cap for E/Bushing Cover Right Angle Extension.

195-00-01
E/BC-MultiportMultiport Bushing Cover

Accommodates bushings with multiple lead connections.

185-00-01
E/BC-HalfBushing Cover Half

Fits small station service transformer bushings, PT’s and CT’s, and pole-top transformer bushings, from 6.90in (175.26 mm) high with an opening of 5.20 in (132.08mm)

130-00-01
E/BC-FullBushing Cover Full

Fits medium-sized transformer breaker, regulator bushings, and arrestors. Will fit bushing diameters up to 5 in., 127.0 mm.

129-00-01
E/C-BAR CVBushing Cover C-Bar

Fits large bushings with double right angle lead connections.

287-00-01
E/BSC-XLBus Support Cover XL

Fits flat, angle or round bus ranging from 4.50 in (114.3 mm) to 5.50in (139.7 mm)

113-00-00
E/BSCBus Support Cover

Fits round, flat or angle bus ranging from 0.50in (12.7 mm) to 3in (76.2 mm).

127-00-01
E/BSC-350E/ Bus Support 3.50

Fits round, flat, or angle bus insulators
ranging from 3in (76.2 mm) to 4.50in (114.3 mm).

127-20-01
E/BIRDCAGE-MEDBirdcage Medium

Semi-exposed walls allows for easy IR inspection and visibility while covering large bushings with a double or single lead connection.

302-00-01
E/BIRDCAGE-LGEBirdcage Large

Semi-exposed walls allows for easy IR inspection and visibility while covering large bushings with a double or single lead connection.

302-00-02
E/BC-90RA90° Right Angle Bushing Cover

Fits larger single or double lead right angle bushing connections.

236-00-01
E/BC-LGBushing Cover Large

Insulates bushings with a skirt diameter up to 8in (203.2mm). Use E/Bushing Cover Large Extensions to add width and height to this cover.

128-00-01